1-888-610-7664

sales@GlobalTestSupply.com

Chat Live

Customer Reviews

SHIMPO FGS-100PXH High Speed Horizontal Motorized Programmable Test Stand, 110 lb (50 kg)

Model: FGS-100PXH

SHIMPO FGS-100PXH High Speed Horizontal Motorized Programmable Test Stand, 110 lb (50 kg)-


Downloads: datasheet manual

SHIMPO FGS-100PXH High Speed Horizontal Motorized Programmable Test Stand, 110 lb (50 kg)

Model: FGS-100PXH

Programmable force test stand with 2 modes of operation: single or continuous cycling. It's versatility offers a wide range of force capacities in horizontal configurations.

Programmable force test stand with 2 modes of operation: single or continuous cycling. It's versatility offers a wide range of force capacities in horizontal configurations.

This product has been discontinued. Click here for the replacement model(s).


SHIMPO FGS-100PXH Offers

Combined with our line of top quality force gauges, the FGS-100PXH's provides a complete force measurement system capable of handling the most precise testing applications. Their all steel construction makes them remarkably rugged while performing with precision. Programming capabilities provide the versatility to tackle a multitude of applications. Two modes of operation, single or continuous cycling allow for a single precise test or repetitive, consistent results. User selectable high and low force set points through RS232 interface or directly through the force gauge allows the test stand to stop at specific force loads while displaying and outputting the displacement.

Features

  • 5 user programmable set points for speed, distance and stop time permit customized testing
  • Compatibility with nearly all manufacturers' force gauges enables flexibility in testing applications
  • Analog voltage output of displacement allows graphing and analysis of data on computer
  • Manually adjustable upper and lower limits restricts movement, allowing for precise testing
  • All gauge functions can be communicated through stand via RS232 interface allowing easy operation and data download
  • Compact, modular design reduces weight, footprint and cost of stand

SHIMPO FGS-100PXH Specifications

Operation Orientation Horizontal
Capacity 110 lb (50 kg)
Travel Speed 0.79 – 19.69 inch/min (20 – 500 mm/min)
Stroke 5.5" (140 mm)
Vertical Clearance N/A
Display Four digit LED, 0.41" high (10.5 mm); Reads in inches (0.01 resolution) or millimeters (0.1 resolution)
Operating Mode Single (SING); Continuous (CONT); Program (PROG); Manual (MANU); Jogging (JOG)
Analog Voltage Outputs the displacement of the stand 10mV/mm; Max: ±1.4V
Time Delay 0 through 5 second delay between direction change
Weight 40 lb (18 kg)
Click here for complete specifications on the SHIMPO FGS-100PXH

What's included with the SHIMPO FGS-100PXH

  • SHIMPO FGS-100PXH High Speed Horizontal Motorized Programmable Test Stand, 110 lb (50 kg)
  • Click on a category to view a selection of compatible accessories with the SHIMPO FGS-100PXH High Speed Horizontal Motorized Programmable Test Stand, 110 lb (50 kg).

    SHIMPO FG-10TJM6 Thread Adapter, 10/32 UNF to M6 FG-10TJM6
    For use with SHIMPO force gauges and force gauge test stands. Fits onto a part or accessory to adapt one thread size to another and to convert it from male to female or female to male, which allows for a variety of accessories and parts to be attached and swapped.




    SHIMPO FG-M6TJ10 Thread Adapter, M6 to 10/32 UNF FG-M6TJ10
    The SHIMPO thread adapter is an accessory for SHIMPO force gauge test stands and force gauges. It fits onto a part or accessory to adapt one thread size to another and to convert it from male to female or female to male, allowing a variety of accessories and parts to be attached and swapped.




    SHIMPO FG-M6TM10 Thread Adapter, M6 (FEM) to M10 (MALE) FG-M6TM10
    The SHIMPO thread adapter is an accessory for SHIMPO force gauge test stands and force gauges. It fits onto a part or accessory to adapt one thread size to another and to convert it from male to female or female to male, allowing a variety of accessories and parts to be attached and swapped.




    SHIMPO FG-M10TJ5/16 Thread Adapter, M10 to 5/16 18UNC FG-M10TJ5/16
    For use with SHIMPO Test Stands and Force Gauges.




    SHIMPO FG-M10TM6 Thread Adapter, M10(FEM) to M6 (MALE) FG-M10TM6
    For use with SHIMPO Test Stands and Force Gauges.




    SHIMPO FG-M4TJ10 Thread Adapter, M4 to 10/32 UNF FG-M4TJ10
    For use with SHIMPO Test Stands and Force Gauges.




    SHIMPO FG-M4TM6 Thread Adapter, M4 (FEM) to M6 (MALE) FG-M4TM6
    For use with SHIMPO Test Stands and Force Gauges.




    SHIMPO FG-M6FPG3 Fine Point Grip, M6 Thread, 3mm FG-M6FPG3
    The SHIMPO M6 thread test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M6 thread. The fine-point grip attachment is for gripping fine- to medium-gauge wire, ribbon tape, and paper.




    SHIMPO FG-M6FPG8 Fine Point Grip, M6 Thread, 8mm FG-M6FPG8
    The SHIMPO M6 thread test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M6 thread. The fine-point grip attachment is for gripping fine- to medium-gauge wire, ribbon tape, and paper.




    SHIMPO FG-M6JAC5U Jacobs Chuck Grip, M6 Thread FG-M6JAC5U
    The SHIMPO M6 thread test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M6 thread. The Jacobs chuck grip attachment has a 100 lb. (45 kg) capacity and is for testing low-gauge wire and rigid rods.




    SHIMPO FG-M6PIN05 Pin Head Grip, M6 Thread, 0.5mm FG-M6PIN05
    The SHIMPO M6 thread test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M6 thread. The small-pin grip attachment (also called pin grip attachment) has a 22 lb. (11 kg) capacity and is for gripping wires and filaments.




    SHIMPO FG-M6PIN1 Pin Head Grip, M6 Thread, 1mm FG-M6PIN1
    The SHIMPO M6 thread test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M6 thread. The small-pin grip attachment (also called pin grip attachment) has a 22 lb. (11 kg) capacity and is for gripping wires and filaments.




    SHIMPO FG-M6PIN2 Pin Head Grip, M6 Thread, 2mm FG-M6PIN2
    The SHIMPO M6 thread test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M6 thread. The small-pin grip attachment (also called pin grip attachment) has a 22 lb. (11 kg) capacity and is for gripping wires and filaments.




    SHIMPO FG-M6SPO10U Spool Grip, M6 Thread FG-M6SPO10U
    The SHIMPO M6 thread test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M6 thread. The spool grip attachment has a 100 lb. (45 kg) capacity and is for anchoring hard-to-hold items such as thread and filaments.




    SHIMPO FG-M6TAP30U Tape Grip, M6 Thread, 30mm FG-M6TAP30U
    The SHIMPO M6 thread test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M6 thread. The tape grip attachment with self-tightening action has a 100 lb. (45 kg) capacity for testing rubber, tape, and paper.




    SHIMPO FG-M6WDG50U Small Capacity Wedge Grip, M6 Thread FG-M6WDG50U
    The SHIMPO M6 thread test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M6 thread. The wedge grip attachment has a 100 lb. (45 kg) capacity and has jaws that close on the specimen and tighten as tension is applied for testing wires, strip material, plastic tape, or film.




    SHIMPO FG-M6FLM20 Wide Film Grip, M6 Thread, 20mm FG-M6FLM20
    The SHIMPO M6 thread test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M6 thread. The spring-loaded film grip attachment with serrated jaws has a 100 lb. (45 kg) capacity.




    SHIMPO FG-SPO10B Base Mount Spool Grip, For Test Stands FG-SPO10B
    The SHIMPO base mount test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials.




    SHIMPO FG-TAP30B Base Mount Tape Grip, For Test Stands FG-TAP30B
    The SHIMPO base mount test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials.




    SHIMPO FG-TEN7B Heavy Duty Base Mount Tensile Grip, 500lbs FG-TEN7B
    The tensile base mount grip has manually tightened, serrated jaws for gripping large loads.




    SHIMPO FG-WDG50B Small Capacity Wedge Grip, for Use with Test Stand Base FG-WDG50B
    The wedge base mount grip has jaws that close on the specimen and tighten as tension is applied, for testing wires, strip material, plastic tape, or film.




    SHIMPO FG-CLV10B Clevis Grip Base Mount for SHIMPO Test Stands, 500lbs FG-CLV10B
    For use with SHIMPO Test Stands. Attaches to a test stand to allow testing on a range of materials.




    SHIMPO FG-FAB80B Fabric Grip Base Mount for SHIMPO Test Stands, 500lbs FG-FAB80B
    For use with SHIMPO Test Stands. Attaches to a test stand to allow testing on a range of materials. Features a M10 thread.




    SHIMPO FG-FLM50B Film Grip Base Mount for SHIMPO Test Stands, 50mm FG-FLM50B
    For use with SHIMPO Test Stands. Attaches to a test stand to allow testing on a range of materials.




    SHIMPO FG-FTG20B Flat Chuck Base Mount Tensile Grip for SHIMPO Test Stands, 100lbs FG-FTG20B
    For use with SHIMPO Test Stands. Attaches to a test stand to allow testing on a range of materials.




    SHIMPO FG-HORIZ-ADAP Base Mount Grip Adapter for Horizontal Test Stands FG-HORIZ-ADAP
    For use with the SHIMPO FGS-100PXL and FGS-100PXH horizontal test stands. This block allows for mounting of attachments and grips by screwing onto a test stand.




    SHIMPO FG-JAC5B Jacobs Chuck Base Mount Grip for SHIMPO Test Stands FG-JAC5B
    For use with SHIMPO Test Stands. Attaches to a test stand to allow testing on a range of materials.




    SHIMPO FGS-ACC Tool Accessory Kit for Test Stands FGS-ACC
    Kit is for mounting a force gauge to a compatible test stand.




    SHIMPO FG-M6COMP50U Compression Plate, M6 Thread, 50mm Diameter FG-M6COMP50U
    The SHIMPO steel compression plate is an accessory for SHIMPO force gauge test stands and force gauges. It includes one compression plate that attaches to the test stand for top-load testing and compression or crush testing on large samples. The plate is made from stainless steel, which resists wear and corrosion, and it has a polished finish that can be wiped clean.




    SHIMPO FG-M6COMP100U Compression Plate, M6 Thread, 100mm Diameter FG-M6COMP100U
    The SHIMPO steel compression plate is an accessory for SHIMPO force gauge test stands and force gauges. It includes one compression plate that attaches to the test stand for top-load testing and compression or crush testing on large samples. The plate is made from stainless steel, which resists wear and corrosion, and it has a polished finish that can be wiped clean.




    SHIMPO FG-M10COMP100U Steel Compression Plate for SHIMPO Test Stands, Ø100mm, 500lbs FG-M10COMP100U
    For top-load testing and compression or crush testing on large samples. Includes one compression plate that attaches to the test stand. Made from stainless steel, which resists wear and corrosion, and has a polished finish that can be wiped clean. Has a diameter of 100mm and a capacity of 500lbs.




    SHIMPO FG-M10COMP50U Steel Compression Plate for SHIMPO Test Stands, Ø50mm, 100lbs FG-M10COMP50U
    For top-load testing and compression or crush testing on large samples. Includes one compression plate that attaches to the test stand. Made from stainless steel, which resists wear and corrosion, and has a polished finish that can be wiped clean. Has a diameter of 50mm and a capacity of 100lbs.




    SHIMPO FG-M10CLV10U Clevis Grip for SHIMPO Test Stands, 500lbs FG-M10CLV10U
    For use with SHIMPO Test Stands. Attaches to a test stand to allow testing on a range of materials. Features a M10 thread.




    SHIMPO FG-M10TWN500U Cord/Twine Grip, M10 Thread; Upper FG-M10TWN500U
    The cord and twine grip with non-locking pins provides a figure-eight wrap of specimen to ensure a center break. It has a throat and pin clearance of 0.375" (9.65 mm) wide, and the throat width is 0.5" (12.7 mm).




    SHIMPO FG-M10TWN500UB Cord/Twine Grip, M10 Thread; Upper & Lower FG-M10TWN500UB
    The cord and twine grip with non-locking pins provides a figure-eight wrap of specimen to ensure a center break. It has a throat and pin clearance of 0.375" (9.65 mm) wide, and the throat width is 0.5" (12.7 mm).




    SHIMPO FG-M10WDG500U High Capacity Wedge Grip, M10 Thread FG-M10WDG500U
    The wedge grip attachment has a 500 lb. (250 kg) capacity and has jaws that close on the specimen and tighten as tension is applied for testing wires, strip material, plastic tape, or film.




    SHIMPO FGV-CTRLCABLE Control Cable for FGV and Motorized Test Stands FGV-CTRLCABLE
    Connects an FGV series force gauge to the input port of a motorized force gauge test stand. Transmits overload and measurement data from the gauge to the test stand. Helps prevent damage to the load cell.




    Customer Reviews for the SHIMPO FGS-100PXH

    Ask a question about SHIMPO FGS-100PXH High Speed Horizontal Motorized Programmable Test Stand, 110 lb (50 kg)

    SHIMPO FGS-100PXH Offers

    Combined with our line of top quality force gauges, the FGS-100PXH's provides a complete force measurement system capable of handling the most precise testing applications. Their all steel construction makes them remarkably rugged while performing with precision. Programming capabilities provide the versatility to tackle a multitude of applications. Two modes of operation, single or continuous cycling allow for a single precise test or repetitive, consistent results. User selectable high and low force set points through RS232 interface or directly through the force gauge allows the test stand to stop at specific force loads while displaying and outputting the displacement.

    Features

    • 5 user programmable set points for speed, distance and stop time permit customized testing
    • Compatibility with nearly all manufacturers' force gauges enables flexibility in testing applications
    • Analog voltage output of displacement allows graphing and analysis of data on computer
    • Manually adjustable upper and lower limits restricts movement, allowing for precise testing
    • All gauge functions can be communicated through stand via RS232 interface allowing easy operation and data download
    • Compact, modular design reduces weight, footprint and cost of stand

    SHIMPO FGS-100PXH Specifications

    Operation Orientation Horizontal
    Capacity 110 lb (50 kg)
    Travel Speed 0.79 – 19.69 inch/min (20 – 500 mm/min)
    Stroke 5.5" (140 mm)
    Vertical Clearance N/A
    Display Four digit LED, 0.41" high (10.5 mm); Reads in inches (0.01 resolution) or millimeters (0.1 resolution)
    Operating Mode Single (SING); Continuous (CONT); Program (PROG); Manual (MANU); Jogging (JOG)
    Analog Voltage Outputs the displacement of the stand 10mV/mm; Max: ±1.4V
    Time Delay 0 through 5 second delay between direction change
    Weight 40 lb (18 kg)
    Click here for complete specifications on the SHIMPO FGS-100PXH

    What's included with the SHIMPO FGS-100PXH

  • SHIMPO FGS-100PXH High Speed Horizontal Motorized Programmable Test Stand, 110 lb (50 kg)
  • Click on a category to view a selection of compatible accessories with the SHIMPO FGS-100PXH High Speed Horizontal Motorized Programmable Test Stand, 110 lb (50 kg).

    SHIMPO FG-10TJM6 Thread Adapter, 10/32 UNF to M6 FG-10TJM6
    For use with SHIMPO force gauges and force gauge test stands. Fits onto a part or accessory to adapt one thread size to another and to convert it from male to female or female to male, which allows for a variety of accessories and parts to be attached and swapped.




    SHIMPO FG-M6TJ10 Thread Adapter, M6 to 10/32 UNF FG-M6TJ10
    The SHIMPO thread adapter is an accessory for SHIMPO force gauge test stands and force gauges. It fits onto a part or accessory to adapt one thread size to another and to convert it from male to female or female to male, allowing a variety of accessories and parts to be attached and swapped.




    SHIMPO FG-M6TM10 Thread Adapter, M6 (FEM) to M10 (MALE) FG-M6TM10
    The SHIMPO thread adapter is an accessory for SHIMPO force gauge test stands and force gauges. It fits onto a part or accessory to adapt one thread size to another and to convert it from male to female or female to male, allowing a variety of accessories and parts to be attached and swapped.




    SHIMPO FG-M10TJ5/16 Thread Adapter, M10 to 5/16 18UNC FG-M10TJ5/16
    For use with SHIMPO Test Stands and Force Gauges.




    SHIMPO FG-M10TM6 Thread Adapter, M10(FEM) to M6 (MALE) FG-M10TM6
    For use with SHIMPO Test Stands and Force Gauges.




    SHIMPO FG-M4TJ10 Thread Adapter, M4 to 10/32 UNF FG-M4TJ10
    For use with SHIMPO Test Stands and Force Gauges.




    SHIMPO FG-M4TM6 Thread Adapter, M4 (FEM) to M6 (MALE) FG-M4TM6
    For use with SHIMPO Test Stands and Force Gauges.




    SHIMPO FG-M6FPG3 Fine Point Grip, M6 Thread, 3mm FG-M6FPG3
    The SHIMPO M6 thread test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M6 thread. The fine-point grip attachment is for gripping fine- to medium-gauge wire, ribbon tape, and paper.




    SHIMPO FG-M6FPG8 Fine Point Grip, M6 Thread, 8mm FG-M6FPG8
    The SHIMPO M6 thread test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M6 thread. The fine-point grip attachment is for gripping fine- to medium-gauge wire, ribbon tape, and paper.




    SHIMPO FG-M6JAC5U Jacobs Chuck Grip, M6 Thread FG-M6JAC5U
    The SHIMPO M6 thread test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M6 thread. The Jacobs chuck grip attachment has a 100 lb. (45 kg) capacity and is for testing low-gauge wire and rigid rods.




    SHIMPO FG-M6PIN05 Pin Head Grip, M6 Thread, 0.5mm FG-M6PIN05
    The SHIMPO M6 thread test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M6 thread. The small-pin grip attachment (also called pin grip attachment) has a 22 lb. (11 kg) capacity and is for gripping wires and filaments.




    SHIMPO FG-M6PIN1 Pin Head Grip, M6 Thread, 1mm FG-M6PIN1
    The SHIMPO M6 thread test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M6 thread. The small-pin grip attachment (also called pin grip attachment) has a 22 lb. (11 kg) capacity and is for gripping wires and filaments.




    SHIMPO FG-M6PIN2 Pin Head Grip, M6 Thread, 2mm FG-M6PIN2
    The SHIMPO M6 thread test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M6 thread. The small-pin grip attachment (also called pin grip attachment) has a 22 lb. (11 kg) capacity and is for gripping wires and filaments.




    SHIMPO FG-M6SPO10U Spool Grip, M6 Thread FG-M6SPO10U
    The SHIMPO M6 thread test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M6 thread. The spool grip attachment has a 100 lb. (45 kg) capacity and is for anchoring hard-to-hold items such as thread and filaments.




    SHIMPO FG-M6TAP30U Tape Grip, M6 Thread, 30mm FG-M6TAP30U
    The SHIMPO M6 thread test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M6 thread. The tape grip attachment with self-tightening action has a 100 lb. (45 kg) capacity for testing rubber, tape, and paper.




    SHIMPO FG-M6WDG50U Small Capacity Wedge Grip, M6 Thread FG-M6WDG50U
    The SHIMPO M6 thread test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M6 thread. The wedge grip attachment has a 100 lb. (45 kg) capacity and has jaws that close on the specimen and tighten as tension is applied for testing wires, strip material, plastic tape, or film.




    SHIMPO FG-M6FLM20 Wide Film Grip, M6 Thread, 20mm FG-M6FLM20
    The SHIMPO M6 thread test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials. The attachment has an M6 thread. The spring-loaded film grip attachment with serrated jaws has a 100 lb. (45 kg) capacity.




    SHIMPO FG-SPO10B Base Mount Spool Grip, For Test Stands FG-SPO10B
    The SHIMPO base mount test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials.




    SHIMPO FG-TAP30B Base Mount Tape Grip, For Test Stands FG-TAP30B
    The SHIMPO base mount test stand grip is an accessory for SHIMPO force gauge test stands that attaches to a test stand to allow testing on a range of materials.




    SHIMPO FG-TEN7B Heavy Duty Base Mount Tensile Grip, 500lbs FG-TEN7B
    The tensile base mount grip has manually tightened, serrated jaws for gripping large loads.




    SHIMPO FG-WDG50B Small Capacity Wedge Grip, for Use with Test Stand Base FG-WDG50B
    The wedge base mount grip has jaws that close on the specimen and tighten as tension is applied, for testing wires, strip material, plastic tape, or film.




    SHIMPO FG-CLV10B Clevis Grip Base Mount for SHIMPO Test Stands, 500lbs FG-CLV10B
    For use with SHIMPO Test Stands. Attaches to a test stand to allow testing on a range of materials.




    SHIMPO FG-FAB80B Fabric Grip Base Mount for SHIMPO Test Stands, 500lbs FG-FAB80B
    For use with SHIMPO Test Stands. Attaches to a test stand to allow testing on a range of materials. Features a M10 thread.




    SHIMPO FG-FLM50B Film Grip Base Mount for SHIMPO Test Stands, 50mm FG-FLM50B
    For use with SHIMPO Test Stands. Attaches to a test stand to allow testing on a range of materials.




    SHIMPO FG-FTG20B Flat Chuck Base Mount Tensile Grip for SHIMPO Test Stands, 100lbs FG-FTG20B
    For use with SHIMPO Test Stands. Attaches to a test stand to allow testing on a range of materials.




    SHIMPO FG-HORIZ-ADAP Base Mount Grip Adapter for Horizontal Test Stands FG-HORIZ-ADAP
    For use with the SHIMPO FGS-100PXL and FGS-100PXH horizontal test stands. This block allows for mounting of attachments and grips by screwing onto a test stand.




    SHIMPO FG-JAC5B Jacobs Chuck Base Mount Grip for SHIMPO Test Stands FG-JAC5B
    For use with SHIMPO Test Stands. Attaches to a test stand to allow testing on a range of materials.




    SHIMPO FGS-ACC Tool Accessory Kit for Test Stands FGS-ACC
    Kit is for mounting a force gauge to a compatible test stand.




    SHIMPO FG-M6COMP50U Compression Plate, M6 Thread, 50mm Diameter FG-M6COMP50U
    The SHIMPO steel compression plate is an accessory for SHIMPO force gauge test stands and force gauges. It includes one compression plate that attaches to the test stand for top-load testing and compression or crush testing on large samples. The plate is made from stainless steel, which resists wear and corrosion, and it has a polished finish that can be wiped clean.




    SHIMPO FG-M6COMP100U Compression Plate, M6 Thread, 100mm Diameter FG-M6COMP100U
    The SHIMPO steel compression plate is an accessory for SHIMPO force gauge test stands and force gauges. It includes one compression plate that attaches to the test stand for top-load testing and compression or crush testing on large samples. The plate is made from stainless steel, which resists wear and corrosion, and it has a polished finish that can be wiped clean.




    SHIMPO FG-M10COMP100U Steel Compression Plate for SHIMPO Test Stands, Ø100mm, 500lbs FG-M10COMP100U
    For top-load testing and compression or crush testing on large samples. Includes one compression plate that attaches to the test stand. Made from stainless steel, which resists wear and corrosion, and has a polished finish that can be wiped clean. Has a diameter of 100mm and a capacity of 500lbs.




    SHIMPO FG-M10COMP50U Steel Compression Plate for SHIMPO Test Stands, Ø50mm, 100lbs FG-M10COMP50U
    For top-load testing and compression or crush testing on large samples. Includes one compression plate that attaches to the test stand. Made from stainless steel, which resists wear and corrosion, and has a polished finish that can be wiped clean. Has a diameter of 50mm and a capacity of 100lbs.




    SHIMPO FG-M10CLV10U Clevis Grip for SHIMPO Test Stands, 500lbs FG-M10CLV10U
    For use with SHIMPO Test Stands. Attaches to a test stand to allow testing on a range of materials. Features a M10 thread.




    SHIMPO FG-M10TWN500U Cord/Twine Grip, M10 Thread; Upper FG-M10TWN500U
    The cord and twine grip with non-locking pins provides a figure-eight wrap of specimen to ensure a center break. It has a throat and pin clearance of 0.375" (9.65 mm) wide, and the throat width is 0.5" (12.7 mm).




    SHIMPO FG-M10TWN500UB Cord/Twine Grip, M10 Thread; Upper & Lower FG-M10TWN500UB
    The cord and twine grip with non-locking pins provides a figure-eight wrap of specimen to ensure a center break. It has a throat and pin clearance of 0.375" (9.65 mm) wide, and the throat width is 0.5" (12.7 mm).




    SHIMPO FG-M10WDG500U High Capacity Wedge Grip, M10 Thread FG-M10WDG500U
    The wedge grip attachment has a 500 lb. (250 kg) capacity and has jaws that close on the specimen and tighten as tension is applied for testing wires, strip material, plastic tape, or film.




    SHIMPO FGV-CTRLCABLE Control Cable for FGV and Motorized Test Stands FGV-CTRLCABLE
    Connects an FGV series force gauge to the input port of a motorized force gauge test stand. Transmits overload and measurement data from the gauge to the test stand. Helps prevent damage to the load cell.




    Ask a question about SHIMPO FGS-100PXH High Speed Horizontal Motorized Programmable Test Stand, 110 lb (50 kg)

    Customer Reviews for the SHIMPO FGS-100PXH

    More SHIMPO Products