1-888-610-7664

sales@GlobalTestSupply.com

Chat Live

Customer Reviews

SHIMPO XP12010 Explosion Proof Magnetic Sensor

Model: XP12010

SHIMPO XP12010 Explosion Proof Magnetic Sensor-


Downloads: manual

SHIMPO XP12010 Explosion Proof Magnetic Sensor

Model: XP12010

This is specifically engineered for use in the oil and petrochemical industries, this stainless steel sensor is completely sealed and explosion-proof. This has low impedance which allow for transistor circuit input. When mated with conduit, it provides positive protection against damage due to water, high humidity, oil, dirt, or corrosive liquids. ATEX listed for II 2 GEExm II T3. This explosion proof is for gas, vapor, and liquid.

This is specifically engineered for use in the oil and petrochemical industries, this stainless steel sensor is completely sealed and explosion-proof. This has low impedance which allow for transistor circuit input. When mated with conduit, it provides positive protection against damage due to water, high humidity, oil, dirt, or corrosive liquids. ATEX listed for II 2 GEExm II T3. This explosion proof is for gas, vapor, and liquid.

Sale Price $517.50 USD
Regular Price $575.00 USD
Availability 2 to 3 Weeks
Quantity

SHIMPO XP12010 Offers

Shimpo XP12010 has a range of 0.01" (0.25 mm) typical clearance.

Features

  • Sine wave output from change in magnetic to non-magnetic
  • Change in voltage proportional to magnetic flux intensity over time
  • 10' (3 m) cable
  • Stainless steel housing, explosion-proof ATEX approved: II 2 GEExm II T3

SHIMPO XP12010 Specifications

Temperature Limits -65 to 200°F (-53.8 to 93°C)
Ambient Temperature Limits -40 to 250°F (-40 to 121°C)
Maximum Pressure 3000 PSI
Output Voltage 60 VPP Minimum
Coil Resistance 170 to 210 Ohm
Output Inductance 80 mH TYP @ 1.0 kHz
Dielectric 500 VRMS @ 60 Hz
Leakage Resistance 100 M Ohms Minimum @ 500 V dc
Cable Shielded Teflon with Teflon Jacketed Leads
Cable Length 30" (762 mm)
Housing Stainless Steel with Epoxy Resin Potting

What's included with the SHIMPO XP12010

  • SHIMPO XP12010 Explosion Proof Magnetic Sensor
  • Customer Reviews for the SHIMPO XP12010

    Ask a question about SHIMPO XP12010 Explosion Proof Magnetic Sensor

    SHIMPO XP12010 Offers

    Shimpo XP12010 has a range of 0.01" (0.25 mm) typical clearance.

    Features

    • Sine wave output from change in magnetic to non-magnetic
    • Change in voltage proportional to magnetic flux intensity over time
    • 10' (3 m) cable
    • Stainless steel housing, explosion-proof ATEX approved: II 2 GEExm II T3

    SHIMPO XP12010 Specifications

    Temperature Limits -65 to 200°F (-53.8 to 93°C)
    Ambient Temperature Limits -40 to 250°F (-40 to 121°C)
    Maximum Pressure 3000 PSI
    Output Voltage 60 VPP Minimum
    Coil Resistance 170 to 210 Ohm
    Output Inductance 80 mH TYP @ 1.0 kHz
    Dielectric 500 VRMS @ 60 Hz
    Leakage Resistance 100 M Ohms Minimum @ 500 V dc
    Cable Shielded Teflon with Teflon Jacketed Leads
    Cable Length 30" (762 mm)
    Housing Stainless Steel with Epoxy Resin Potting

    What's included with the SHIMPO XP12010

  • SHIMPO XP12010 Explosion Proof Magnetic Sensor
  • Ask a question about SHIMPO XP12010 Explosion Proof Magnetic Sensor

    Customer Reviews for the SHIMPO XP12010

    More SHIMPO Products